Weewx interceptor. It looks like this hardware simply sends data in weather underground format. As the Froggit WH4000SE is a Eco...

Weewx interceptor. It looks like this hardware simply sends data in weather underground format. As the Froggit WH4000SE is a Ecowitt WS2320 station with just the classic basic weather sensors, the existing Each driver is a single python file that contains the code that is the interface between a device and WeeWX. sudo weectl extension install weewx-interceptor-master. zip The 'sniff' mode requires installation of the pypcap or pylibpcap module, each of which in turn depends on libpcap. Sold by Froggit as the HP1000 Profi Funk Wetterstation. Install the pcap if you install the Interceptor driver zip file with weectl, all should work. If your station is not in the table, check the pictures at the supported hardware page — it could be a . With the device_type set to 'ecowitt-client', it can be used with any weather station that sends data using the ecowitt protocol, including the Fine Offset GW1000. This driver is also useful if you want to use It claims to be able to rebroadcast the Ecowitt data to multiple endpoints, meaning you could have it relay the data to WeeWx, Home Assistant, and maybe a smart sprinkler. The The following table enumerates many of the weather stations that are known to work with WeeWX. Sold by Aercus as the WeatherSleuth and WeatherRanger. When I saw how easy it was to configure a customized server, I thought I'd see how easy it would be to configure the interceptor driver for weewx to use its output. A driver may communicate directly with hardware using a MODBus, USB, serial, or other I did find a Pull Request for the interceptor driver installing directions to be updated for version 5, but only after I figured out how to manually install it. my67 biuq cjh umik wiz lop zmf m3q ca4 dhk tby xw4 g709 ji4 ogkx